BLUCONNECT / GUIDE

Light alerts: flash the lights for the doorbell, alarm or a water leak

Last updated: 16 November 2026

Sometimes you don't hear the doorbell or notice the alarm. The "Flash lights" action flashes the lights you pick so the alert is visible anywhere in the house, whatever brand they are.

How to set it up

  1. In Routines, create a new routine or open an existing one.
  2. Add action → Flash lights.
  3. Pick up to 10 lights and how many times they should flash (1–10).
  4. Optionally pick a colour (red, orange, green, blue, white): colour lights switch to it first.
  5. Add a trigger: doorbell, alarm, water leak or camera motion.

Examples

  • Flash the living room lights 3 times when the doorbell rings
  • Flash the kitchen lights blue on a water leak
  • Flash every light red when the alarm goes off

How it works

The lights go off and on for about 0.7 seconds per step and stay on at the end. The action can also go into a scene and run manually with one tap.

FAQ

Can I use it on the Free plan?
Yes, in scenes you run manually. Automations that run by themselves on the doorbell, alarm or a sensor are a BluConnect Plus feature.

Which lights work?
Any light that BluConnect can switch on and off: Philips Hue, IKEA, Nanoleaf, WiZ, Matter and more. Colour only applies to colour lights.

BluConnect is on the App Store in Türkiye; Android is coming soon. Start free; upgrade to Plus when you need it. Download on the App Store ↗ · See plans ↗